Contractor Branding is a complimentary program offered that enables contractors to private label their purchased thermostats. On White-Rodgers, Sensi, and Emerson thermostats contractors can print their company information and logo on thermostats and wall plates. Locations, content and size vary by thermostat.
Any contractor who purchases our thermostats is eligible to participate in the Contractor Branding program.
It is free to participate in the Contractor Branding Program.
In order to have your information printed on a thermostat you must setup your artwork and reference your Imprint number on a valid PO from your distributor.
The imprint number is provided at the end of the setup process on https://webapps.emerson.com/wrprocontractorbranding/
Completing the setup process does not order your thermostats. All thermostats are ordered through an eligible wholesaler.
All wholesalers who sell our thermostats are eligible to fulfill Contractor Branding orders.
The only thing needed to order contractor branded thermostats is reference of the imprint number on the PO.
It take approximately 9 working days from the time the order is placed to receive the branded thermostats. (Based on thermostat availability)
There is a minimum order quantity of 12 thermostats for Contractor Branding.
No. There is no mix and matching to meet the minimum quantity. 12 of the same thermostat must be ordered.
Yes, the print area on each Thermostat may be different. Artwork, a unique Imprint number, is needed to be created for each thermostat sku.
We use a digital printer to add you company information to our thermostats.
We use the PMS color from the uploaded file and match to the Pantone Color Bridge Guide (Coated). If the uploaded file does not have a PMS color reference for each color in the file, we will attempt to visually match colors as best possible. Individual color adjustment with raster files (PNG, JPG, BMP) is very limited. Vector files (EPS or PDF) with PMS colors referenced within the file are highly recommended and give us the best ability to match color.
All logos must be at least 300DPI (Dots Per Inch) and in the following formats: EPS, PDF, JPG, PNG, BMP. Images should have at least 600 px width. The higher the resolution, the better the image will look when printed. Also, vector files (EPS or PDF) with PMS colors referenced within the file are highly recommended and give us the best ability to match color.
In order to print your logo on our thermostats, you must submit a logo that meets the requirements. We will not be able to create a logo for you.
You cannot make changes to existing I-Numbers. If you would like to make a change, please create a new design and use the I-Number generated for the correct information.